|
| | 13_euler-with-amr.create_solver (adaptive, dynamic=False, gradient=False) |
| | The tutorial's solver over a regular, an adaptive or a dynamically adaptive mesh.
|
| |
| | 13_euler-with-amr.build_and_run (directory, adaptive=False, dynamic=False, gradient=False) |
| | Generate, compile and run the tutorial setup within directory.
|
| |
| | 13_euler-with-amr.build_and_run_fd4 (directory, init_point_wisely) |
| | Generate, compile and run the fourth-order Finite Differences over the regular mesh within directory.
|
| |
| | 13_euler-with-amr.read_snapshot (directory, snapshot, patch_file=PatchFile) |
| | Return the time stamp and all patches (offset, size, values) of a snapshot.
|
| |
| | 13_euler-with-amr.number_of_snapshots (directory, patch_file=PatchFile) |
| |
| | 13_euler-with-amr.density_along_x_axis (directory, snapshot, patch_file=PatchFile) |
| | Return time stamp plus volume centres and densities along y=0, x>=0.
|
| |
| | 13_euler-with-amr.plot_mesh (directory) |
| | Initial density plus the patch boundaries.
|
| |
| | 13_euler-with-amr.plot_snapshots (directory) |
| | Density at three time stamps side by side.
|
| |
| | 13_euler-with-amr.plot_profile (directory) |
| | Density along the positive x-axis at a few time stamps.
|
| |
| | 13_euler-with-amr.plot_active_patches (directory) |
| | Highlight the patches which hold steep density gradients at the end.
|
| |
| | 13_euler-with-amr.plot_adaptive_mesh (directory) |
| | Initial density on the adaptive mesh plus the patch boundaries.
|
| |
| | 13_euler-with-amr.plot_adaptive_snapshots (directory) |
| | Density at three time stamps on the adaptive mesh plus patch boundaries.
|
| |
| | 13_euler-with-amr.plot_profile_comparison (regular_directory, adaptive_directory) |
| | Density along the positive x-axis: regular against adaptive mesh.
|
| |
| | 13_euler-with-amr.print_conservation (directory) |
| | Total mass and energy of the first and the last snapshot.
|
| |
| | 13_euler-with-amr.plot_setup_task_graph () |
| | Construct the setup task graph with the refinement criterion and draw it.
|
| |
| | 13_euler-with-amr.patch_counts (directory) |
| | Time stamps and numbers of patches of all snapshots.
|
| |
| | 13_euler-with-amr.plot_dynamic_patch_count (directory) |
| | Number of patches per snapshot of the dynamically adaptive run.
|
| |
| | 13_euler-with-amr.plot_dynamic_mesh_change (directory) |
| | Density and patch boundaries right before the first mesh change and at the end.
|
| |
| | 13_euler-with-amr.gradient_snapshots (directory) |
| | Snapshots for the comparison of the point-wise and the gradient-based criterion: t=0.1, 0.2 and 0.25.
|
| |
| | 13_euler-with-amr.plot_gradient_profile_comparison (pointwise_directory, gradient_directory) |
| | Density along the positive x-axis: point-wise against gradient-based criterion.
|
| |
| | 13_euler-with-amr.plot_gradient_patch_counts (pointwise_directory, gradient_directory) |
| | Number of patches per snapshot of both dynamically adaptive runs.
|
| |
| | 13_euler-with-amr.plot_gradient_mesh (pointwise_directory, gradient_directory) |
| | Density and patch boundaries of both runs at t=0.2.
|
| |
| | 13_euler-with-amr.create_gradient_pictures (dynamic_directory, gradient_directory, skip_run) |
| | Run the gradient-based criterion and compare it to the point-wise one.
|
| |
| | 13_euler-with-amr.plot_fd4_explosion_time_step_sizes (directory) |
| | Time step sizes of the fourth-order Finite Differences for the point explosion.
|
| |
| | 13_euler-with-amr.plot_fd4_snapshots (directory) |
| | Density of the Gaussian pulse at three time stamps side by side.
|
| |
| | 13_euler-with-amr.plot_fd4_profile (directory) |
| | Density of the Gaussian pulse along the positive x-axis at a few time stamps.
|
| |
| | 13_euler-with-amr.plot_mesh_adaptation_task_graph () |
| | Construct the mesh adaptation task graph of the dynamically adaptive setup and draw it.
|
| |
1.9.8